Plasma Cutting
Plasma cutting is an excellent alternative to laser cutting different types of materials of various thicknesses due to its outstanding finish and low cost.
Plasma cutting is an excellent alternative to laser cutting different types of materials of various thicknesses due to its outstanding finish and low cost.
Plasma cutting is ideal for your non-standard parts. Our tables allow the cutting of all metal pieces up to 12 feet wide and 100 feet long.
Plasma cutting may be suitable for different hard metals thicker than laser cutting allows.
Plasma systems have been developed and designed to offer accurate cuts of the highest quality.
12 ft x 100 ft
All metals: 1/8 inches to 2 inches
Steel, stainless steel and aluminum
Line depth: 0,015" *
Line width: 0,031" *
* Depending on the thickness and type of material.
Please contact us to find out if your materials can be cut.
Request a quote onlineMaterial Thickness |
Minimum Diameter |
Cutting Tolerance |
---|---|---|
1/8 | 0.125" | ±0.060" |
3/16 | 0.1875" | ±0.060" |
1/4 | 0.250" | ±0.060" |
5/16 | 0.3125" | ±0.060" |
1/2 | 0.500" | ±0.060" |
5/8 | 0.625" | ±0.060" |
3/4 | 0.750" | ±0.060" |
7/8 | 0.875" | ±0.060" |
1 | 1.000" | ±0.060" |
1 1/8 | 1.125" | ±0.060" |
1 1/4 | 1.250" | ±0.060" |
1 3/8 | 1.375" | ±0.060" |
1 1/2 | 1.500" | ±0.060" |
1 5/8 | 1.625" | ±0.060" |
1 3/4 | 1.750" | ±0.060" |
2 | 2.000" | ±0.080" |
Material Thickness |
Minimum Diameter |
Cutting Tolerance |
**Diameters below thickness can be punched or drilled** |